deliver the results you need:
non-clog characteristics with
maximum efficiency.
- Passes 3 inch
non-deformable solids
- Complies with
10 state standard
- Better hydraulic
performance
- Oil filled motor efficiently
dissipates heat, lubricates
bearings, and locks out
damaging moisture
The Ten States Standards
•
-
10 states in Upper Midwest and Ontario, CA
•
-
Many other states have also adopted
•
-
Paragraph 42.33, Pump Openings:
–Pumps handling raw wastewater shall be capable of passing spheres of at least 3 inches (80mm) in diameter.
H4H Non-Clog Pump
- 4” Discharge
- Passes a full 3” diameter non-deformable spherical solid per the 10 States Standards
- Meets S4P performance
- Steep non-overloading curve
- Flows to 850 GPM, Heads to 105 ft
- Beats S4P efficiency
- Design that will not clog
- Streamlined impeller vane at inlet
- Smooth flow path
- H4H wet end can be retro-fitted to Hydromatic S4P motor end
H3H Non-Clog Pump
- 3” Discharge
- Passes a full 3” diameter non-deformable spherical solid per the 10 States Standards
- Performance
- Steep non-overloading curve
- Flows to 575 GPM, Heads to 105 ft
- Highly efficient
- Design that will not clog
- Streamlined impeller vane at inlet
- Smooth flow path
- Can easily be converted to an H4H pump to meet future lift station demands
H4Q Non-Clog Pump
- 4” Discharge
- Passes a full 3” diameter non-deformable spherical solid per the 10 States Standards
- Performance
- Steep non-overloading curve
- Flows to 850 GPM, Heads to 150 ft
- Design that will not clog
- Streamlined impeller vane at inlet
- Smooth flow path
- Integrated pump-out vanes
- Keeps seal area clear of debris
- Balances pressure distribution
- Provides material for integrated balancing
What to know more?
Click here to contact your local Hydromatic Authorized distributor today.