Reliability
The moisture sensor saves money and decreases downtime by allowing you to take corrective action before an expensive bearing or motor failure occurs. Hydromatic pumps incorporate an internal moisture sensor that detects the presence of moisture in the oil chamber. The sensors signal to the warning system lets you know that the lower seal is beginning to leak. This allows you to schedule maintenance within 2 to 4 weeks while the pump continues to operate.

Some manufacturers put a moisture sensor in the motor area. Moisture is detected after it begins affecting the bearings and motor itself. The lower seal moisture sensor allows you to perform maintenance at your convenience instead of reacting to an emergency breakdown. The internal moisture sensor saves you money and decreases downtime.Hydromatic supplies necessary plumbing to connect the water jacket to the suction and discharge piping. This plumbing includes ball valves what allows easy removal of the water jacket for periodic cleaning without shutting down the system.

Cooling Fins (Optional)
When additional cooling is required Hydromatic can supply pumps with cooling fins. These cooling fins are designed to keep the motor temperature in the normal operating range.

Water Jacket (Optional)
When additional cooling is required Hydromatic can supply pumps with water jackets. These water jackets are designed to keep the motor temperature in the normal operating range.