| Superior
Features: |
| •Carbon/Ceramic
type 21 mechanical seal |
| •Oil-filled motor with automatic reset thermal overload for maximum protection (one phase models) |
| •Upper & lower ball-bearing construction |
| •Piggyback
plug available for easy maintenance and switch replacement |
| •Capacitor
start for increased starting torque (one phase models) |
| |
| Download
PDF Sales Sheet |
| Download
PDF Manual |
| Download
Specification
Submittal Data |
| Specifications |
| Typical Application: |
High-head effluent and dewatering |
| Capacities: |
up to
63 GPM (4.0 LPS) |
| Heads: |
up to
63 ft. (19.2 m) |
| Electrical: |
115V,
1ø, 14.5 FLA, 60Hz
200/230V,
1ø, 7.6 FLA, 60Hz
230V, 3ø, 3.1 FLA, 60Hz
460V, 3ø, 1.6 FLA, 60Hz
575V, 3ø, 1.2 FLA, 60Hz |
| Motor: |
(Single Phase) - 1/2 HP split phase with start capacitor
and thermal overload protection, 3450 RPM; (Three Phase)
- 1/2 HP polyphase, 3450 RPM |
| Minimum
Recommended Sump Diameter: |
Simplex
= 24" (609.6 mm)
Duplex = 30" (762 mm) |
Automatic
Operation:
|
Wide-angle float switch (1ø only, manual available) |
| Materials
of Construction: |
Class
30 cast iron |
| Impeller: |
Class 30 cast iron |
| Discharge
Size: |
2”
NPT (50.8 mm) |
| Solids
Handling: |
3/4”
(19.1 mm) |
| Power
Cord: |
1ø
- 20', SJTW, STW-A (30' optional)
3ø - 20', STW-A (30' optional) |
| |
|
 |
Hydromatic reserves the right to
make revisions to its products and their specifications,
this catalog and related information without notice.Most
models are UL Listed and/or CSA Approved.
|
