Hydromatic Pump

Superior Features:

•Two (2) carbon/ceramic type 21 mechanical seals mounted in tandem

•Oil-filled motor with automatic reset thermal overload for maximum protection (one phase models)

•Upper & lower ball-bearing construction

•Seal failure probe warns of seal leak (optional)

•Capacitor start for increased starting torque (one phase models)

Download PDF Sales Sheet

Download PDF Manual

Download Specification Submittal Data

Specifications:

Typical Application :	High-head effluent and dewatering
Capacities:	up to 55 GPM (3.5 LPS)
Heads:	up to 127 ft. (39 m)
Electrical:	230V, 1ø, 12 FLA, 60Hz 200V, 3ø, 6.1 FLA, 60Hz 230V, 3ø, 6.0 FLA, 60Hz 460V, 3ø, 2.5 FLA, 60Hz 575V, 3ø, 2.0 FLA, 60Hz
Motor:	(single phase) 1.5 HP split phase w/solid- state switch, start capacitor and thermal overload protection, 3450 RPM; (three phase) 1.5 HP polyphase, 3450 RPM
Intermittent Liquid Temperature:	140°F (60°C)
Minimum Recommended Sump Diameter:	Simplex = 24" (609.6 mm) Duplex = 36" (914.4 mm)
Automatic Operation:	Manual standard Optional - wide-angle float switch (1ø only)
Materials of Construction:	Class 30 cast iron
Impeller:	Thermoplastic semi-open nonclog
Discharge Size:	1-1/2” NPT (38.1 mm)
Solids Handling:	3/4” (19.1 mm)
Power Cord:	1ø (without seal failure probe) - 20', STW-A 1ø (with seal failure probe) & 3ø - 20', STW-A

Hydromatic reserves the right to make revisions to its products and their specifications this catalog and related information without notice.Most models are UL Listed and/or CSA Approved.