Director of Sales for Hydromatic Products

Ashland, Ohio – June 2002 – Pentair Pump Group is pleased to announce new sales leadership position for Rod Mitchell.
Rod Mitchell is promoted to Director of Sales for Hydromatic Products. Rod has been with Pentair Pump Group since July 1995 and was previously Hydromatic’s Residential Product Sales Manager. He graduated from Ohio Wesleyan in 1995 earning a Bachelor of Science degree in Business.

Hydromatic, founded in 1959, is located in Ashland, Ohio, with additional distribution in Canada. Hydromatic is a manufacturer of wastewater products for residential, commercial, municipal, domestic and international markets. Hydromatic, an ISO 9001 registered quality system, is a part of the Pentair Pump Group of Pentair, Inc.

Pentair, Inc. (NYSE: PNR) with annual sales of $2.7 billion, is a diversified manufacturer operating in three principal markets: tools, enclosures, and water technologies. Headquartered in St. Paul, Minnesota, Pentair was incorporated in 1966, with 50 operations and distribution locations in North America, Europe and Asia.

Performance Data :

Click here to view performance data

Specifications:

Pump Type:	Submersible Grinder Pump
Pump Model:	HPD200 Positive Displacement Grinder
Hertz:	60Hz or 50Hz
Full Load Amps:	15 for 60Hz and 10 for 50Hz
RPMl:	1750 for 60 Hz and 1460 for 50 Hz
Phase:	1Ø
Voltage:	230
Horse Power :	2 Hp
Motor Type :	Oil cooled induction capacitor start
Remp:	140¾ F Ambient
Operation:	Intermittent
Thermal Overload :	Bi-Metallic
Temperature:	Max. Water 140¾ F
NEMA Design :	Type A
Insulation:	Class F
Discharge:	1-1/4" NPT
Unit Weight :	85 lbs.
Power Cord :	Type SJOW/SJOW-A Water Resistant 600 V, 60¾ C CSA Approved 20' Ft. Std.

Materials of Construction:

Motor Housing :	Cast Iron ASTM-48
Pump Casing :	Cast Iron ASTM-48
Coolant/Lubricant:	Dielectric Oil
Shaft:	Stainless Steel
Mechanical:	Seal Faces: Carbon/Ceramic Shart Seal Seal Body: Stainless Steel Spring: Stainless Steel Bellows: Buna-N
Rotor:	Buna-N, DBL Helix
Stator:	300 Series SST, Single Lobe
Cutters:	440C hardened 55-60 Rockwell C
Upper Bearing:	Single Ball Bearing
Lower Bearing:	Single Ball Bearing
Fasteners:	Stainless Steel

Hydromatic reserves the right to make revisions to its products and their specifications, this catalog and related information without notice. Most models are UL Listed and/or CSA Approved.